Heating solution for large-space industrial plants - IMPRESIND Gas radiant heating system-伊普赛德燃气辐射采暖-意科潘热水辐射板-高大空间采暖-北京正弘奥能环保科技有限公司

Heating solution for large-space industrial plants - IMPRESIND Gas radiant heating system

time：2024-11-12
hits：1835次
source：正弘奥能

With the advantages of high efficiency, energy saving, safety and comfort of gas radiation heating systems becoming increasingly prominent in recent years, more and more high-ceiling industrial workshops are adopting gas radiation heating systems as superior heating equipment. According to the "Architectural Design Fire Code": "Fire hazard category of various production processes using gases, liquids, or solids as fuel or burning gases or liquids for other purposes" is classified as Class D. Therefore, the adoption of gas radiation heating does not increase the building's risk and design difficulty. 
 
In the heating of high-ceiling industrial workshops, the choice of gas radiation heating system only requires connecting pipes on the gas supply network and installing pressure regulating and stabilizing equipment at the system inlet. No boiler and other auxiliary equipment need to be installed, and there is no heating water circulation system, which greatly reduces the initial investment. At the same time, due to the high temperature of the radiation tubes, the gas consumption is low, which can greatly save energy investment. 
 

	Choosing a gas radiation heating system eliminates the need for large and complex boilers and boiler rooms, making the system simple in structure and with a short installation period. The radiant tubes are usually installed in the upper part of the building's heating space, so they occupy little or no building space, saving valuable real estate. Currently, gas radiation heating equipment technology is very mature, and direct emission of gas combustion to the outdoors is completely feasible and meets environmental protection requirements. Gas radiation heating systems operate quietly and do not produce convective air, avoiding dust agitation in industrial workshops and improving the sanitary conditions of the heating space. 


	 
 


	<img src="https://www.leadwaypower.com/Uploads/image/20241112/20241112100710_19917.jpg" alt="" /> 
 

 
IMPRESIND gas radiant heating system promoted and sold by Beijing Leadway Power Co., Ltd. is an independent heating system. The system uses infrared radiation heating technology. The burner burns natural gas, and the high-temperature smoke generated under negative pressure is driven by a centrifugal fan to flow in the aluminum alloy steel radiator. The high-temperature surface of the radiator generates infrared radiation waves, which directly heat the area radiated. At the same time, the high-temperature smoke in the radiator after the heat exchange is partially recycled through the pre-mixing chamber for secondary heating, so that the energy is fully utilized, and the heating efficiency is greatly improved. 
 
The accompanying control system is easy to operate and convenient. It can be divided into different zones and time periods for heating according to the needs of the hangar, and the equipment can also be turned on and off at any time to reduce energy consumption and reduce energy waste. A single controller can control up to 59 devices, and each device can be set with independent temperature parameters to improve the accuracy of temperature control and operational safety. 
 
IMPRESIND gas radiant heating system heating generator is installed outside the building, such as on the top or side wall of the building, and the radiation tubes are installed above the interior space of the building, without occupying the building's usable space. The radiant heat is directly radiated downwards, and the ground can accumulate some heat. The indoor air temperature of the gas radiant heating is 2-3°C lower than that of the convective heating, the indoor air temperature gradient is small, the heat loss is small, and the cold air penetration is also smaller. By ensuring comfort and reducing heat energy consumption, effective energy-saving measures can be taken to ensure that the interior temperature of the high-ceiling industrial workshop is comfortable, and at the same time reduce heating costs and increase enterprise benefits.