The advantages of gas radiant heating method in large-space industrial buildings-伊普赛德燃气辐射采暖-意科潘热水辐射板-高大空间采暖-北京正弘奥能环保科技有限公司

The advantages of gas radiant heating method in large-space industrial buildings

time：2024-11-14
hits：1885次
source：正弘奥能

The heating system is not for the building, for the indoor air service, but should be based on personnel, in addition to meeting the production process requirements, to personnel comfort and reduce energy consumption as the main goal. If the traditional heating methods such as radiators and heaters are used, this heating method based on natural convection heat release causes a large upper and lower temperature gradient, which both accounts for the building area, and will cause ash, affecting health and human health, and is prohibited in some occasions. As for the heating of open and semi-open venues, the use of gas radiators has unparalleled advantages.


	 

Infrared radiation heating equipment specially tailored for tall space industrial plants and workshops has the most advanced level in the field of heating technology in the world today. The infrared radiation heating equipment realizes the heat transfer function by emitting infrared radiant heat to the specific direction of the heating space. Most substances in the human body and nature have strong absorption characteristics of infrared radiation, which can intensify its molecular movement after receiving radiation, and immediately convert into heat energy, so that the temperature rises rapidly, which is the thermal effect of infrared. 
 

	The infrared ray produced by the gas radiation tube passes through the air layer and is absorbed by the human body and objects, and the thermal effect is significant. The ground temperature is 4℃ ~ 8℃ higher than the surrounding air temperature, and the temperature of the ground, wall, object and 2 times of radiation can make the air temperature distribution of the working area below 2m uniform, resulting in a comfortable microclimate. The working area temperature of the radiator heating room is 2℃ ~ 3℃ lower than that of the convective heating method, which can meet the same comfort. The upper and lower temperature gradient of the house is small, the upper air temperature is not high, and the ineffective heat loss is reduced.


	 



	<img src="https://www.leadwaypower.com/Uploads/image/20241114/20241114174401_42352.png" alt="" /> 


 

	IMPRESIND&nbsp;gas infrared radiation system promoted and sold by Beijing Leadway Power Co., LTD., can achieve independent control or centralized remote control, can set economic mode, night antifreeze mode and holiday mode according to the time, can also be local intermittent heating, and can set the temperature to run by itself, low operation and maintenance costs.



Compared with similar products currently on the market, IMPRESIND gas infrared radiation heating products have different advantages: 
 
1, safety: the use of negative pressure operation technology, the first vacuum pump to start work before the system ignition. When any link in the system (power supply, gas supply, ignition, negative pressure) fails, the system will automatically shut down, fully ensuring the safety of the equipment and heating area. 
 
2, energy saving: direct heating of the heating area, greatly reducing the heat loss caused by convection heating due to hot air stratification and cold air intrusion can save energy 30-50%, greatly reducing operating costs. 
 
3, environmental protection: The use of natural gas, liquefied petroleum gas and other clean energy as fuel, not only saves the boiler room and coal yard land and pollution, and the exhaust gas after combustion for water and carbon dioxide is harmless to the environment. 
 
4, high efficiency: After the heat exchange of the hot fluid inside the radiation tube, part of the product will be used for flue gas recirculation through the premix chamber, which greatly improves the heating efficiency and makes full use of energy.