IMPRESIND gas radiant heating system has stable performance and high efficiency-伊普赛德燃气辐射采暖-意科潘热水辐射板-高大空间采暖-北京正弘奥能环保科技有限公司

IMPRESIND gas radiant heating system has stable performance and high efficiency

time：2025-03-24
hits：839次
source：正弘奥能

GB50019-2015 Design Code for Heating, Ventilation and Air conditioning of industrial buildings 5.5.4: When gas infrared radiation heating is used, the calculated indoor temperature should be 2℃ ~ 3℃ lower than the air temperature in the convective heating room. Under the premise of achieving the same heating effect, compared with convective heating, gas radiation heating has a lower heat load, which also means that the more energy saving and the higher energy utilization rate. Experiments have proved that the room temperature of 16℃ under gas radiation heating is equivalent to the indoor environment under convective heating of 18~20℃. It is also understood that for every 1℃ reduction in indoor calculation temperature, energy consumption can be reduced by about 5% to 10%.


	 


	<img src="https://www.leadwaypower.com/Uploads/image/20250423/20250423100113_67516.png" alt="" />

 
IMPRESIND gas radiant heating system, a product of Beijing Leadway Power Co., LTD., is an independent heating system composed of three parts: generator, radiation tube and temperature control system. The generator burns natural gas, and the hot fluid generated flows in the radiation tube made of aluminum alloy and steel under the drive of the negative pressure centrifugal fan, producing infrared radiation and directly acting the radiant heat on the heating area. The thermal conversion rate of the system is more than 90%, stable performance, energy saving and high efficiency. 
 
Gas recirculation system: 
IMPRESIND has advanced combustion and flue circulation systems. After the heat exchange of the hot fluid inside the radiation tube is completed, part of the product will be recycled through the premixing chamber to achieve full utilization of energy, and the thermal conversion rate is as high as 90%. The other part of the generator is completely burned, and the emissions can be directly discharged to the outside. The emissions meet the national emission standards. Twice heating to achieve energy saving, environmental protection, reduce the purpose of operating costs. 
 
Intelligent temperature control system: 
IMPRESIND has an intelligent temperature control system that always optimizes the indoor temperature. The control system compares the temperature signal from the intelligent sensor and generates control instructions to adjust the temperature intelligently. Users can perform time-sharing and partition temperature control according to their needs. For example, the system can set the temperature for different times of the day for 24 hours, or for different days of the week, and can be turned on and off at any time, thus reducing energy consumption. 
 

	IMPRESIND gas radiant heating system can meet the heating needs of different tall space places such as factory workshops, warehouses, garages, hangars, aircraft maintenance warehouses, shipyards, etc. Compared with other heating methods, it can not only reduce one-time investment costs, but also save energy up to 30%~50% in each heating season.