Why do you choose IMPRESIND gas radiant heating system for large-space buildings?-伊普赛德燃气辐射采暖-意科潘热水辐射板-高大空间采暖-北京正弘奥能环保科技有限公司

Why do you choose IMPRESIND gas radiant heating system for large-space buildings?

time：2025-04-17
hits：308次
source：正弘奥能

In tall space buildings, especially in the industrial field, the conventional convection heating method will heat the air first. Due to the density difference between cold and hot air, the hot air in the space will float up and the cold air will sink, resulting in a serious vertical imbalance in the temperature in the room, forming a large amount of ineffective heat consumption above the roof. In order to overcome the vertical imbalance in the height direction, the heating method of gas infrared radiation is mainly used for the heating of tall space buildings. 
 

	IMPRESIND&nbsp;gas radiation heating system generator, promoted and sold by Beijing Leadway Power&nbsp;Co., LTD., burns natural gas, the thermal fluid generated flows in the radiation tube, generates infrared rays, does not heat the air, directly acts the heat on the heating object (ground, object, human body), and the heat loss is small. The radiation tube adopts a special double graphite sealing ring pad joint device, which can make the perfect connection between the radiation tubes. No need to use organic sealant sealing, safe and convenient, can withstand 1500℃ high temperature, avoid joint fracture due to excessive expansion, to the greatest extent to ensure the safety of the workplace and the reliability of high space heating system.


	 


	<img src="https://www.leadwaypower.com/Uploads/image/20250422/20250422100748_33521.jpg" alt="" /> 

 
Compared with similar products currently on the market, IMPRESIND gas radiant heating system has different advantages: 
 
1, safety: the use of negative pressure operation technology, the first vacuum pump to start work before the system ignition. When any link in the system (power supply, gas supply, ignition, negative pressure) fails, the system will automatically shut down. The safety of equipment and heating area is fully guaranteed. 
 
2, energy saving: direct heating of the heating area, greatly reducing the heat loss caused by convection heating due to hot air stratification and cold air intrusion can save energy 30-50%, greatly reducing operating costs. 
 
3, environmental protection: The use of natural gas, liquefied petroleum gas and other clean energy as fuel, not only saves the boiler room and coal yard land and pollution, and the exhaust gas after combustion for water and carbon dioxide is harmless to the environment. 
 
4, high efficiency: After the heat exchange of the hot fluid inside the radiation tube, part of the product will be used for flue gas recirculation through the premix chamber, which greatly improves the heating efficiency and makes full use of energy. 
 

	5, intelligent: to achieve independent control or centralized remote control, you can control up to 59 groups of equipment, automatic control and temperature regulation is convenient, can achieve partition, time-sharing control temperature. At the same time, it has automatic opening and closing function on time.


	 


	<img src="/Uploads/image/20250417/20250417104217_72486.jpg" alt="" /> 

 
IMPRESIND gas radiant heating system generator burns completely, so that the heat is fully utilized. At the same time, after the heat exchange of the hot fluid inside the radiation tube, part of the product will be used for gas recirculation through the premixing chamber, and heated twice to achieve energy saving and environmental protection and reduce operating costs. Under the premise of establishing the same comfortable conditions, the design temperature of the building during radiation heating can be reduced by 2°C~3°C compared with that during convection heating, which can also save heating energy consumption. At the same time, there is no air stratification, and the heating problem of various tall space buildings is well solved.